deff[3798]: (DEtector File Filter) - Hardware filter deff[3798]: Version: 2.0.0 - Nov 9 2002 (steffenp/wiebusch@ifh.de) deff: a filter program to simulate various Hardware in the data-stream Usage: deff [arguments] Default: input/output on stdio (ascii) -h help:This text -v Verbose mode -H Write all events to output stream, even if all hits have been deleted. Default is NO. -d : Add a delay of nsec to channel -D xxx add a time offset of xxx [nsec] to each hitand all tracks -e ::[:] set ADC values to for hits with time .. (and current ADC value less than ) -N : Simulate 1PE noise in +- ns in this event using a rate of kHz -r Set sensitivity of OM to 0.0 and remove all hits in this channel. -R Delete OM from geometry and events (rebuild geometry) -s Set sensitivity of all OMs in string to 0.0 and remove all hits in this string. -S Delete String from geometry and events (rebuild geometry) -W Combine hits in the same OMs, if they appear within the time window [ns] (default 250). Amplitudes are added. This is equivalent to a DEAD-time simulation. -t Set a threshold of pe to each channel and remove hits with amplitudes below. -T :: Set amplitudes of channels to above to . -P :::[what] RSortAmp: Asign the ADC to certain hits The amplitude (ADC) value is assigned to the hit, depending on the value of the optional string [what]: what=tot (default) : assign to the largest TOT what=all : assign to all hits what=first : assign to the first hit Only hits within the time window - [ns] + [ns] (e.g. -2000:2270) around the trigger- time (e.g. 22496 ns) (=> - <= t <= +) are used! This option replaces the program rsortamp and is designed especially for the AMANDA-B DAQ -i Randomize DAQ inefficiencies with the probability (in %) to loose a hit This function replaces the fdaq program -I 0000 Randomize channel inefficiencies with 0.980 for each channel (OBSOLETE) -I 1993 Randomize channel inefficiencies as estimated for NT36 1993 -I 1994 Randomize channel inefficiencies as estimated for NT36 1994 -I IS OBSOLETE !!!! Please use -i or -q -J Randomize the time of each hit with an uniform distribution (+- 0.5* -y opt Clean hits in the event options: r=: reduce hits before fit = number of early hits to be removed = number of late hits to be removed if a value is <0, take percentage of total hits R=: reduce hits before and after (time window) c=: use only -fold coincident hits within a window of ns C=: use only -fold SKIP-coincident hits within a window of ns a=::: use only hits with < amp < amph> for channels <= ch <= (default = all) b=::: use only hits with < tot < toth> for channels <= ch <= (default = all) i=