ppc-gpu needs the following tables: cfg.txt configuration file with various parameters (DOM efficiency correction is set in this file) wv.dat wavelength-tabulated DOM acceptance calculated from qe_dom2007a table of efficiency.h file as.dat parameters of the angular sensitivity polynomial expansion before running the program create a link to one of the provided files: as.nominal nominal (measured in the lab) as.holeice hole ice (corrected by hole ice model) rnd.txt table of random number multipliers for the multiply-with-carry random number generator tilt.par files describing the ice tilt tilt.dat delete unless using icemodel.sp2 (SPICE^2) icemodel.par file with 6 parameters of the icemodel icemodel.dat main ice properties table: depth/b_e(400)/a_dust(400)/\delta\tau (as in report icecube/200911002) before running the program create a link to one of the provided files: icemodel.aha AHA model icemodel.sp1 SPICE model icemodel.sp2 SPICE^2 model icemodel.sp2+ SPICE^2+ model **ATTENTION** You must delete files tilt.par and tilt.dat if using AHA or SPICE, but not SPICE^2 Only SPICE^2 and higher have been fitted to use the tilted ice description.