-----Original Message----- From: Newcomb, Matthew Sent: Wed 12/17/2008 11:22 AM To: Lee Greenler; Cherwinka, Jeff A-333; Ham, Thomas A-333-S; Hill, Gary Subject: RE: Data To Go Along With The Logger Hi Lee, Apologies, I should have read your first email a little more closely. My bad. You know it's possible that we've been bitten by the difference in newline characters between unix and windows/dos machines. I've added a few new files with -dos appended to their name. These should use the dos newline character. Perhaps that will display better on notepad. Let me know. The .dat files are in fact organized. I'll use the cable-payout file as an example as it's simpler: # ['seconds'] ['ns'] ['[1710] TOS.Payout at Tower from Cable.Value (double)'] 1229198400 6497000 0 1229198400 265805000 0 1229198400 509735000 0 The first line is a header describing which variable is in which column. In this case there is a seconds and ns past the second column followed by a payout at tower from cable column. The as-drilled file is a bit more complicated, but here are the variables in the header: # ['seconds'] ['ns'] ['[240] HPP.Manifold Flow Sum By RPM (double)', - The HPP's are positive displacement pumps. This is a calculated output of all of the HPP's ( before the water is heated ). '[241] HPP.Manifold Flow Sum (double)', This is the same number as above, except it is measured by venturi flow meters. '[52] System.MHP Flow Sum (double)', This is the sum of the paddle wheel output flow sensors on all MHP's. '[232] HPP.MHP Return Line Flow.Value (double)', This is the measured flow about to leave the drill camp. '[239] HPP.MHP Return Line Flow By RPM (double)', This is the calculated flow about to leave the drill camp. Basically this is the same as the "HPP.Manifold Flow Sum By RPM" variable except is is corrected for the heat expansion of the water. '[226] HPP.MHP Return Line Temperature.Value (double)', A measured water temperature as it's about to leave the drill camp. '[1916] Drill.Depth by Pressure (double)', Given the pressure reported by the drill head, this is the drills depth by pressure. '[1710] TOS.Payout at Tower from Cable.Value (double)', '[1716] TOS.Payout at Tower from Hose.Value (double)', Encoder readings of the amount of cable and hose sent down the hole. Should have been zeroed with the drill at the floor of the TOS. '[1482] TOS.Drill Head Cable Drum.Requested Velocity In.Value (double)', The requested drilling velocity. '[1734] TOS.By Pressure.Velocity Filtered (double)', '[1722] TOS.Payout at Tower from Cable.Velocity Filtered (double)', '[1728] TOS.Payout at Tower from Hose.Velocity Filtered (double)', Calculated drill velocities from a given data source. '[1919] Drill.Hose Temperature Celcius (double)', The water temperature in the hose reported by the drill head. '[1944] Drill.Calipers in Meters (double)'] The diameter of the hole as reported by the drill calipers.