The following two waveforms should be similar. They are from two different runs but with the same width and brightness settings

run00110316_Subrun00000001 Flasher3955 Receiver3954 Mask1 B=0 W=50 atwd2.

run00110317_Subrun00000001 Flasher3955 Receiver3954 Mask1 B=0 W=50 atwd2.

The following waveforms should be brighter than the two above; same LED flashing at higher brightness

run00110317_Srun0000022 Flasher3955 Receiver3954 Mask1 B=16 W=40 atwd2.

The following two are with outward pointing LED #7 flashing.

run00110319_Subrun00000001 Flasher3931 Receiver3930 Mask64 B=0 W= 127 atwd1.