HUB | Start of Tests | Results |
Retest Desired? |
Current Status |
| ichub60 | 8/24 | mainboards 57 and 58 rebooted back to configboot (power glitch?) | no | This hub is not going to the pole (old revision hub) |
| ichub63 | 8/24 | IP address wrong in /etc/hosts | no | tested OK |
| ichub70 | 8/27 | no problems | no | tested OK |
| ichub77 | 8/28 | mainboards 57 and 58 rebooted back to configboot (power glitch?)
later, DOR card #1 dropped out of data-taking |
yes, need to check DOR card #1 | fail |
| ichub76 | 8/28 | IP address wrong in /etc/hosts mainboard flash erased accidentally! computer crashed at start of test cycle! |
yes | fail |
| ichub75 | 8/29 | yellow GPS cable not plugged in to DOR card #7 | no | tested OK |
| ichub62 | 8/29 | no problems | no | tested OK |
| ichub69 | 8/30 | shortmoat repeatedly fails. After talking to John, moat was found to be failing to capture what the error was, so all we know is that shortmoat failed twice, but we don't know why. | yes, and if shortmoat fails again John needs to debug the software | fail |
| ichub68 | 8/30 | no problems | no | tested OK |
| ichub61 | 8/31 | green and yellow LEDs on front of display channel are reversed. we need to cut the tie wraps to make some slack to move the LEDs into the correct positions. | no | tested |
| ichub52 | 9/1 | no problems | no | tested |
| ichub53 | 9/1 | no problems | no | tested |
| ichub44 | 9/2 | plastic case on DOM power suply was cracked and DOMHub was making an awful noise - Sebastian adjusted the plastic and noise went away | no, but plastic power case for Acopian power supply needs to be checked; fan cover for left supply, bottom fan, was badly cracked at the bottom. Decision is to send supply to pole as is. | tested |
| ichub54 | 9/2 | no problems | no | tested |
| ichub45 | 9/3 | no problems | no | tested |
| ithub05 | 9/4 | sudo misconfiguration | no | tested OK |
| ithub06 | 9/4 | no problems | no | tested OK |
| ichub41 | 9/5 | initially, checkGPS claimed cards 4,5 and 7 were BAD
yellow cables were loose |
no | tested OK |
| ichub42 | 9/5 | has new DSB fuse; plan is for all hubs from now on to be tested with DSBs which have the new fuse | no | tested OK |
| ichub31 | 9/6 | when hub was moved for memory testing, the black plate covering the push button switches (reset buttons etc) on the front panel had somehow lodged over the buttons. The hub would not power up, and would send no video to a monitor which was hooked up to it. Eventually, the problem was discovered and rectified; also, sudo misconfiguration | no | tested |
| ichub32 | 9/6 | after kickstart, 7 of 8 DOR cards had incorrect 101 version of firmware instead of 104q and dor-driver had to be reinstalled | no | tested |
| ichub33 | 9/6 | DOR card 7 had loose yellow ethernet cable | no | tested |
| ichub34 | 9/7 | no | tested | |
| ichub35 | 9/7 | DSB (#109) acted like it had a blown fuse - replaced with DSB (#113) | tested OK | |
| ichub76 retest | 9/7 | hub repeatedly crashes - all i had to do was run "domstate 01B" after powering up the DOMs and the hub would crash. When we hook up the 8 "DOMs in boxes", the same thing happens. Nothing appears on the console. Bug in dor-driver coupled with strange hub/DOR card? On investigation, John J suggests replacing DOR card 0, so we are trying this and then will retest the hub... | yes | fail |
| ichub69 retest | 9/7 | unable to reproduce shortmoat failure | no | tested OK |
| ichub77 retest | 9/8 | DOR card #1 problem not present | no | tested OK |
| ichub36 | 9/9 | no | tested OK | |
| ichub37 | 9/10 | no | tested OK | |
| ichub22 | 9/10 | no | tested | |
| ichub76 retest | 9/10 | after DOR card 0 replacement, yellow cable was not plugged in all the way | no | tested |
| ichub60 (the real one) | 9/11 | no | tested OK | |
| new ichub51 | 9/11 | old ichub51 was abandoned (wouldn't power up properly); DOR power connector was wired up backwards - caught during assembly by Matt and Will; Hub power module (left one?) failed a couple of times during power up in the rack - we aren't sure what happened; no DOM power until DOM power switch was turned off and on | no | tested OK |
| new ichub43 | 9/11 | old ichub43 was abandoned (wouldn't power up properly) | tests ongoing | |
| ichub23 | 9/12 | no | tested OK | |
| ichub24 | 9/12 | no | tests ongoing |