2005/06/10 16:30 16:30;;2005/06/10;;+25;;LCChain 2005-6-10 18:00;;Hagar;; 2005-6-10 18:30;;Success.
Connection between hub was not tested.
hub2-hub1-hub5
The hubs connection was tested succesfuly

setup here:
fathub1 fathub2
fathub5
;;one doms (700) was not communicating. It was replaced by fat 6 dom Leprechaun (620) 2005/06/10 16:50 16:50;;2005/06/10;;+25;;STF 2005-6-11 18:49;;hagar;;- fathub2 : ok
- 3 doms failed flasher clock. after fb update passed. fathub1, fathub5: stoppetd before flasher-width. many flasher clock failures.all passed after fb update.
---------
run u and t speratly for flasher width.
all doms passed. 2005-6-15 11:00;;problem running flasher-width on hub1 and hub2

2 failures: flasher bright on 13215a559856 Hadephobia, 666


flasher width on Ecclesiophobia 664;; 2005/06/10 18:20 18:20;;2005/06/10;;+25;;DOMCal 2005-6-10 22:40;;hagar;;Updated domcal on all doms.
7b0de8658562 LeukoPhobia Failed to calibrate. It is on fathub1 111U. updated domcal (again) but still no HV info while updating HV2DB 2005-6-10 23:40;;~/domcal/domcal+25/
1 dom failed
histos here.
;; 2005/06/10 19:20 19:20;;2005/06/10;;+25;;Lux 2005-6-11 10:40;;hagar/kael;;error: connection refused from lightsource.py.
Rates very high 20k-30k
one dom readouts=0, the same one who did not calibrate
Chris killed a python light control script, and now ok. 2005-6-11 18:47;;11.lux
;; 2005/06/11 08:00 08:00;;2005/06/11;;+25;;TestDAQ 2005-6-14 21:16;;hagar and later mark;;Beginning of run was very bumpy.

more details here
testdaq is now mworking after a domhubaoo update using Kael's fix. for more details contact Mark.

more gps problems on hub5, card2, although hub was rebooted earlier.
Another problem is that the output fiels are not written to the same directory.
rebooting hub....
....now run 6874 - fathub2 card3 gps is gone, did fpga 3 f 3 and restrted the run.

again for gps hub5,2 fpga 2 f 3....boring

unbeleivablem after disk space problem, for runs 6884, 6885 messages: "requested dom not present in hit stream" for all hubs and "
icecube.daq.domhub.common.DHDriverException: Reply does not match a known DOM App message format
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
4635 [Thread-11] ERROR TestDAQ Control - DOM Hodophobia 52cae978ebb0 fathub2.32B failed configuration change
icecube.daq.domhub.common.DHDriverException: Reply does not match a known DOM App message format
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
"

rebooted all three hubs, started testdaq.

Runs (which Hagar started at run number 6887) were successful during the night until the DOM Ephebiphobia went dead during the first time resolution run (#6930)

consequently, i am repeating the previous run (the last of the ped pattern runs) and also the timeres runs.

these runs start with run number 6943

I deleted runs 6930 to 6942 from the data warehouse staging area.

2005-6-15 9:00;;runs:
6887-6928, 6944-6947;; 2005/06/11 16:30 16:30;;2005/06/11;;+25;;Soaking / stability 2005-6-12 18:52;;kael;;see lux run above 2005-6-12 18:52;;;; 2005/06/11 17:30 17:30;;2005/06/11;;+25;;Cooldown 2005-6-15 13:11;;Claire / Hagar;;cold_rebbot started 2005-6-17 9:35;;failures:
fathub2:
630 - 17 failures - Obesophobia, 3270c...
530 - Murophobia, 39f663d...1 failure-
610 - Radiophobia, ea6f08e...3 failures
730 - Mythophobia, 12d916...- 1 failure

fathub2:
730 - fe4fff5cfe19 -Photophobia- two failures

;; 8; 2005/06/12 08:30 ; -20; Defrost 9; 2005/06/12 09:15 ; -20; Cooldown 2005/06/12 22:00 22:00;;2005/06/12;;-45;;STF 2005-6-17 9:45;;hagar;; 2005-6-17 11:49;;fails:
725, novercaphobia - flasher bright
4e41e17f6b7e atwd pulser, chipB 1
e4194d677ad0 - disc scan
6458149340b pmt hv ramp
0912cde99f01 pmt hv ramp
01c99
01c997d687a6 atwd pulser 40pe, chip A1
69a843a5e181 pmt hv ramp
34bb7d414187 pmt hv ramp
721, textophobia - flasher bright
597, xyrophobia, flasher width
679, symmetrophobia flasher bright
669, sciaphobia, flasher bright
peccatophobia, 689 flasher bright
nomatophobia 647 - flasher bright
scoleciphobia 693 - flasher bright, flasher width

limnophobia, 676 flasher bright
666, hadephobia flasher bright
648, hobophobia flasher bright
702, globophobia, fash bright
lavophobia flasher bright
618, ephebiphobia flasher width
ideophobia 708 - flasher bright
714, graphobia flasher width
638, cancerphobia - flasher width;; 2005/06/13 09:00 09:00;;2005/06/12;;-45;;DOMCal 2005-6-17 11:51;;hagar;;upgrdae to domcal 5.8 2005-6-17 13:5;;all doms calibrated but
7b0de8658562
Leukophobia;; 2005/06/13 10:00 10:00;;2005/06/13;;-45;;TestDAQ 2005-6-17 13:6;;hagar;;run 6950- error in card 2 fathub5
and card 3 and 1 on fathub2
Reloaded pages 3 and 1. without rebooting,
----
run 6951
I forgot to "ready" on hub2. restart.
-----
run 6952-6954 - gps on hub5
rebooted hubs

----
run 6955-6958 ok
-----
run 6959 hung


run 6960 encountered GPS errors, fathubs 2 and 5 were rebooted

started sequence of testdaq runs where we left off with run 6961


assorted GPS problems occured until we rebooted the fathub5 again and started up run 6967

debugged problems with new script until data taking for real began with run 6970
---

run 6970 -gps.
reloaded page 3,1 on fathub5
------
run 6975 seems ok
-------
run 6979 : gainvsHv 1300 - Leukophobia does not respond to slow control
----
fine til 6995 where Sitiophobia 3a5... is lost(first linearty rn )...restarting tetsdaq and reloading all cards on hub2 and hub5
---
6997.-7010ok

run 7012 - Papaphobia dropped out from slow control.
restarted testdaq and fpga hub2 and hub5
------
run 7013 did not start well
-----
run 7014, 7015 ok
---
run 7016 Trichopathophobia failed comm...
-----
run 7018... 7027 2005-6-18 2:06;;good runs:
6955-6958,
6975-6993 (Leukophobia not responding, but this guy is dead already)
6997.-7010
7014 , 7018-7027;; 2005/06/13 17:00 17:00;;2005/06/17 21:00;;-45;;LUX 2005-6-19 18:40;;hagar;; 2005-6-19 21:38;;06/19.lux
;; 2005/06/13 19:00 19:00;;2005/06/17 23:00;;-45;;Soaking / stability 2005-6-18 2:7;;hagar;; 2005-6-20 9:56;;06/18 = 40.2 hours
06/19 = 12 hours
;; 2005/06/14 19:00 19:00;;2005/06/19 21:00;;-45;;Cooldown 2005-6-20 9:57;;Claire;;started cold reboot at 10:00 2005-6-20 20:26;;;; 2005/06/15 08:30 08:30;;2005/06/20 8:00;;-55;;STF 2005-6-20 21:15;;hagar;;using new version of stf, with the new commands called "stfA" and "stfB"

running on all tests but flasher using old stf 2005-6-20 23:39;;
here
;; 2005/06/15 10:00 10:00;;2005/06/20 10:00;;-55;;DOMCal 2005-6-20 19:59;;mark;;upload domcal v5.9 and started domcal 2005-6-20 21:00;;all doms calibrated by 7b0de8658...;; 2005/06/15 11:00 11:00;;2005/06/20 12:00;;-55;;Lux 2005-6-20 23:41;;hagar;;3592798f3eb0-TP5P0597-Xyrophobia is not communicating restarting.
The light source were left on, so I stopped it again when the light source are off.
restarted. now there are 146 doms with good starting rate.
happy I am ! 2005-6-21 10:59;;first in 20.lux, but only the nohup file is in.
then in 21.lux

9 hours of monitoring;; 2005/06/15 13:00 13:00;;2005/06/20 14:00;;-55;;TestDAQ 2005-6-21 10:59;;hagar;;start at 0007028 - card 2 hub 5 gps.
I put a script called fpgall in bin to reload pages 1,3 on all cards.
---
run 7029-7036 used the wrong steering files. I had a typo in automate
---
7037... later;;;; 20; 2005/06/15 21:00; -55; Soaking / stability 21; 2005/06/17 08:00; -55; Warmup 22; 2005/06/17 11:30; -20; STF 23; 2005/06/17 13:00; -20; DOMCal 24; 2005/06/17 14:00; -20; Lux 25; 2005/06/17 16:00; -20; TestDAQ 26; 2005/06/18 08:30; -20; Soaking / stability 27; 2005/06/19 08:30; -20; Defrost 28; 2005/06/19 09:15; -14; Warmup1 29; 2005/06/19 14:15; +15; Warmup2 30; 2005/06/20 09:15; +25; LCChain 31; 2005/06/20 10:00; +25; STF 32; 2005/06/20 11:05; +25; DOMCal 33; 2005/06/20 12:05; +25; TestDAQ 34; 2005/06/20 19:05; +25; Lux 35; 2005/06/20 21:05; +25; Soaking / stability 36; 2005/06/21 16:30; +25; Cooldown 37; 2005/06/22 08:30; -20; Defrost 38; 2005/06/22 09:15; -20; Cooldown 39; 2005/06/22 19:15; -45; STF 40; 2005/06/23 08:00; -45; DOMCal 41; 2005/06/23 09:00; -45; Lux 42; 2005/06/23 11:00; -45; TestDAQ 43; 2005/06/23 19:30; -45; Soaking / stability